plastic layer meaning in Chinese
可塑层
塑料覆盖薄膜铺放机
Examples
- Fracturing grouting technique applied in consolidation of soft amp; amp; plastic layers
劈裂注浆技术在软流塑地层加固中的应用 - The main contents of the paper are : ( 1 ) review the state and art for fiber - wound vessel with metal inner lining ; ( 2 ) provide a method to present the technical features including wound process , equal stress dome and fiber gathering at the dome etc . ( 3 ) establish a finite element analysis model considering nonlinear physical and geometrical effects and develop a equivalent constitutive relation for winding graphite fiber reinforced plastic layers ; ( 4 ) set up a failure criterion for the inner metal lining and winding graphite fiber reinforced plastic layers ; ( 5 ) develop a corresponding engineering analysis code based on the commercial software ansys ; ( 6 ) investigate the plastic deformation and residual stress in the inner lining due to winding tension and pre - tension , and stress distribution of the composite vessel under service loading case
本文旨在为具有金属内衬的纤维缠绕复合容器的参数设计提供分析模型、方法及工程软件。论文主要内容是： ( 1 )对复合容器分析国内外研究的概述； ( 2 )复合容器的几何表征方法及工艺中若干力学问题； ( 3 )复合容器结构分析的物理和几何非线性有限元列式及其纤维层的等效本构关系； ( 4 )复合容器的破坏类别； ( 5 ) ansys程序的二次开发； ( 6 )典型复合容器的数值讨论。本论文工作将对工程界复合容器设计和分析工作者具有参考价值。 - This paper also researches on thermal elastoplastic analysis model of multilayered graded coating structures on the basis of thermal elastoplastic analysis model of trilayered materials with the focus on the structural character of graded coating . it builds the thermal elastoplastic analysis theory for the graded coating structure that has a single plastic layer or two plastic layers . it gives the analytical formulas of thermal stresses and the thermal elastic - plastic transform temperatures of graded coating that has a single plastic layer or two layers under the thermal loading
针对梯度涂层的结构特征，在建立的三层叠层材料热弹塑性分析模型的基础上，对多层梯度涂层结构的热弹塑性分析模型进行了研究，分别建立了含单个塑性层和两个塑性层的梯度涂层结构的热弹塑性分析理论，给出了在热载荷作用下含单个塑性层和两个塑性层的梯度涂层的热弹性-塑性临界温度和热应力分析公式，利用有限元分析对理论模型进行了验证。 - This paper firstly extends the thermal elastoplastic deformation theory of trilayered materials derived by suresh et al and abolishes the restrictive assumption to the monodirectional spread of plastic zone in the original model and the thermal elastoplastic analysis model which reflects the complete history of thermal elastoplastic deformation of the multilayered materials is built . this model can be also applied to the condition of the spread of plastic zones from both sides of plastic layers and has more applicability compared to suresh et al ' s model
论文首先推广了suresh等人建立的三叠层材料热弹塑性变形理论，取消了原理论模型中塑性区域单向扩展的限制性假设，建立了反映叠层材料完整热弹塑性变形历史的热弹塑性行为分析模型，该模型同时适用于塑性层的塑性区域双边扩展的情况，较suresh等人的模型适用性更为广泛。